Dr. Günther Inspections GbR
Lauenhainer Weg 3,
08393
Meerane
Germany
Germany
Telephone +49 3764 7791-870
Fax +49 3764 7791-899
info@optical-inspections.com
http://www.optical-inspections.com
Fax +49 3764 7791-899
info@optical-inspections.com
http://www.optical-inspections.com
Media files
Our range of products
Product categories
- 05 Measurement, testing, control technology and software
- 05.01 Measurement and control technology, sensoring
- 05.01.01 Measurement and control
- 05.01.01.06 Measurement and control of glass tension
Measurement and control of glass tension
- 05 Measurement, testing, control technology and software
- 05.01 Measurement and control technology, sensoring
- 05.01.02 Inspection technology
- 05.01.02.01 Inspection of surface, contour and imperfection
Inspection of surface, contour and imperfection
Our products
Product category: Inspection of surface, contour and imperfection
KSWI-18C Symmetrical 18-camera side wall inspection system
- Detection of all known side wall defects using the shine through method
- Detection of stress defectsn using polarised light
- Detection of additional defects in the shoulder and mouth rim area
- Measuring of height, diameter and axis deviation
- Detection of stress defectsn using polarised light
- Detection of additional defects in the shoulder and mouth rim area
- Measuring of height, diameter and axis deviation
Product category: Inspection of surface, contour and imperfection
BMF-5C Bottom and mouth rim inspection system
- Detection of all known defect types in the bottom using the transmitted light method
- Detection of stress defects in the bottom using polarised light
- Detection of defects in round cams, engravings or other design elements with a special evaluation algorithm
- Detection of defects in the container mouth rim
- Reading of mould numbers in every rotation position
- Inspection for bird swings
- Detection of stress defects in the bottom using polarised light
- Detection of defects in round cams, engravings or other design elements with a special evaluation algorithm
- Detection of defects in the container mouth rim
- Reading of mould numbers in every rotation position
- Inspection for bird swings
Product category: Inspection of surface, contour and imperfection
MIS mouth rim inspection system
- The inspection is contact-free while the containers are driving on a conveying belt
- Mouth rims from 15 – 120 mm can be inspected
- The inspection is independent from changing light conditions and glass colours
- The rejection of the NOK parts is controlled by an encode
- Mouth rims from 15 – 120 mm can be inspected
- The inspection is independent from changing light conditions and glass colours
- The rejection of the NOK parts is controlled by an encode