Rottler und Rüdiger und Partner GmbH

Mühlsteig 57, 90579 Langenzenn
Germany
Telephone +49 9101 9947-0
Fax +49 9101 9947-20
info@rottler-ruediger.de

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.08  Insulation glass technology
  • 02.08.02  Production equipment for spacers

Our products

Product category: Production equipment for spacers

Swisspacer processing

In addition to our specialised saw lines for framework production, we have given some thought to the area of glazing bar engineering and model assembly. The crowning glory of the category is the ultrasonic welding engineering for the industrial processing of Swisspacer profiles to spacer frames

More Less

Product category: Production equipment for spacers

Spacer bars with 45 degrees miter cut

The new full automatic desiccant filling concept ‚Fillit' fills just those bars that need to be filled.

The fillit concept is directly linked to the spacer processing Station Romillo and will do the filling process of single bars inline without additional operators. Inside the bars the desiccant will be trapped between two stoppers out of foam. The filled bars are then going to get welded to a spacer frame and will afterwards proceed in the conventional process of DGU- producing. The bars can also be assembled manually to frames with standard corner keys. The foam plug inside the bar will keep the desiccant in place, so no desiccant will slip around the key. As you can also spare the bars with an integrated joint connection – desiccant pollution inside of DGUs will furthermore belong to the past.

The amount of filled desiccant can also be adjusted more precisely. As each bar can be filled individually you can decide whether you would like to fill one, two, three or four bars in every thinkable combination. This will save costs and secures the quality of your DGUs. The best thing about the fillit process is, that it just works automatically within the cutting station. No additional process or manpower is needed.

More Less

Product category: Production equipment for spacers

Spacer bar bending

The frame bending machines from Rottler and Rüdiger are bending machines for spacer bars that have been specially adapted to match the current requirements of the insulating glass market. The spacer frames that have been bent on our bending machines impress with their extreme precision and dimensional accuracy. This is one of the most important factors in the production of triple glazed insulating glass. In addition to aluminium and stainless steel, hybrid spacer profiles (Rolltech; TGI,Thermix) are equally easy to bend.

As with all machines from Rottler and Rüdiger, the bending technology is also characterised by extremely short set-up times, user friendly operation and modularity. Because of this, our bending machines can be individually tailored to the needs of each insulating glass manufacturer.

From simple hand bending devices to fully automatic profile bending machines with the largest spacer frame magazine on the market, we have the right frame bender for every application.

More Less

About us

Company details

The R&R Group consists of Rottler and Rüdiger and Partner GmbH, MPK - Modelle-Profile-Konfektion GmbH and R&R Sonnenschutztechnik GmbH and has a staff of approximately 100 employees in 6 locations. The family run business places great value on being down to earth and having close customer contact. Following the Rüdiger family’s exit from the business due to retirement, all business units are now in the hands of the Rottler family. With the sons Roland and Stefan Rottler at the helm, the next generation has successfully assumed full responsibility.

More Less